function [pnt, ori, lab] = channelposition(sens)

% CHANNELPOSITION computes the channel positions and orientations from the
% coils or electrodes
%
% Use as
%   [pos, ori, lab] = channelposition(sens)
% where sens is an electrode or gradiometer array.
%
% See also FT_DATATYPE_SENS

% Copyright (C) 2009-2012, Robert Oostenveld & Vladimir Litvak
%
% This file is part of FieldTrip, see http://www.ru.nl/neuroimaging/fieldtrip
% for the documentation and details.
%
%    FieldTrip is free software: you can redistribute it and/or modify
%    it under the terms of the GNU General Public License as published by
%    the Free Software Foundation, either version 3 of the License, or
%    (at your option) any later version.
%
%    FieldTrip is distributed in the hope that it will be useful,
%    but WITHOUT ANY WARRANTY; without even the implied warranty of
%    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%    GNU General Public License for more details.
%
%    You should have received a copy of the GNU General Public License
%    along with FieldTrip. If not, see <http://www.gnu.org/licenses/>.
%
% $Id: channelposition.m 8919 2013-11-29 13:20:49Z roboos $

% remove the balancing from the sensor definition, e.g. planar gradients, 3rd-order gradients, PCA-cleaned data or ICA projections
if isfield(sens, 'balance') && ~strcmp(sens.balance.current, 'none')
  sens = undobalancing(sens);
end

% keep it backward compatible with sensor definitions prior to 2011v1 (see ft_datatype_sens), which have pnt/ori instead of coilpos/coilori.
if isfield(sens, 'ori')
  sens.coilori = sens.ori;
  sens = rmfield(sens, 'ori');
end
if isfield(sens, 'pnt')
  sens.coilpos = sens.pnt;
  sens = rmfield(sens, 'pnt');
end

% treat all sensor arrays similar, i.e. as gradiometer systems
if     ~isfield(sens, 'coilori') && isfield(sens, 'coilpos')
  sens.coilori = nan(size(sens.coilpos));
elseif ~isfield(sens, 'coilori') && isfield(sens, 'elecpos')
  sens.coilori = nan(size(sens.elecpos));
end

switch ft_senstype(sens)
  case {'ctf64', 'ctf151', 'ctf275' 'bti148', 'bti248', 'bti248grad', 'itab28', 'itab153', 'yokogawa64', 'yokogawa160', 'babysquid74'}
    % the following code applies to systems with only axial gradiometers or magnetometers
    
    %%%%%%%%%%%%%%%%%%%%%%%%%%
    % do the MEG sensors first
    %%%%%%%%%%%%%%%%%%%%%%%%%%
    sensorig   = sens;
    sel        = ft_chantype(sens, 'meg');
    sens.label = sens.label(sel);
    sens.tra   = sens.tra(sel,:);
    
    % subsequently remove the unused coils
    used = any(abs(sens.tra)>0.0001, 1);  % allow a little bit of rounding-off error
    sens.coilpos = sens.coilpos(used,:);
    sens.coilori = sens.coilori(used,:);
    sens.tra     = sens.tra(:,used);
    
    % compute distances from the center of the helmet
    center = mean(sens.coilpos);
    dist   = sqrt(sum((sens.coilpos - repmat(center, size(sens.coilpos, 1), 1)).^2, 2));
    
    % put the corresponding distances instead of non-zero tra entries
    maxval = repmat(max(abs(sens.tra),[],2), [1 size(sens.tra,2)]);
    maxval = min(maxval, ones(size(maxval))); %a value > 1 sometimes leads to problems; this is an empirical fix
    dist = (abs(sens.tra)>0.7.*maxval).*repmat(dist', size(sens.tra, 1), 1);
    
    % for the occasional case where there are nans: -> 0's will be
    % converted to inf anyhow
    dist(isnan(dist)) = 0;
    
    % put infs instead of the zero entries
    dist(~dist) = inf;
    
    % use the matrix to find coils with minimal distance to the center,
    % i.e. the bottom coil in the case of axial gradiometers
    % this only works for a full-rank unbalanced tra-matrix
    
    numcoils = sum(isfinite(dist),2);
    
    if all(numcoils==numcoils(1))
      % add the additional constraint that coils cannot be used twice,
      % i.e. for the position of 2 channels. A row of the dist matrix can end
      % up with more than 1 (magnetometer array) or 2 (axial gradiometer array)
      % non-zero entries when the input grad structure is rank-reduced
      % FIXME: I don't know whether this works for a vector-gradiometer
      % system. It also does not work when the system has mixed gradiometers
      % and magnetometers
      
      % use the magic that Jan-Mathijs implemented
      tmp      = mode(numcoils);
      niter    = 0;
      while ~all(numcoils==tmp)
        niter    = niter + 1;
        selmode  = find(numcoils==tmp);
        selrest  = setdiff((1:size(dist,1))', selmode);
        dist(selrest,sum(~isinf(dist(selmode,:)))>0) = inf;
        numcoils = sum(isfinite(dist),2);
        if niter>500
          error('Failed to extract the positions of the channels. This is most likely due to the balancing matrix being rank deficient. Please replace data.grad with the original grad-structure obtained after reading the header.');
        end
      end
    else
      % assume that the solution is not so hard and just determine the bottom coil
    end
    
    [junk, ind] = min(dist, [], 2);
    
    lab(sel)   = sens.label;
    pnt(sel,:) = sens.coilpos(ind, :);
    ori(sel,:) = sens.coilori(ind, :);
    
    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
    % then do the references
    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
    sens = sensorig;
    sel  = ft_chantype(sens, 'ref');
    
    sens.label = sens.label(sel);
    sens.tra   = sens.tra(sel,:);
    
    % subsequently remove the unused coils
    used = any(abs(sens.tra)>0.0001, 1);  % allow a little bit of rounding-off error
    sens.coilpos = sens.coilpos(used,:);
    sens.coilori = sens.coilori(used,:);
    sens.tra = sens.tra(:,used);
    
    [nchan, ncoil] = size(sens.tra);
    refpnt = zeros(nchan,3);
    refori = zeros(nchan,3); % FIXME not sure whether this will work
    for i=1:nchan
      weight = abs(sens.tra(i,:));
      weight = weight ./ sum(weight);
      refpnt(i,:) = weight * sens.coilpos;
      refori(i,:) = weight * sens.coilori;
    end
    reflab = sens.label;
    
    lab(sel)   = reflab;
    pnt(sel,:) = refpnt;
    ori(sel,:) = refori;
    
    sens = sensorig;
    
  case {'ctf64_planar', 'ctf151_planar', 'ctf275_planar', 'bti148_planar', 'bti248_planar', 'bti248grad_planar', 'itab28_planar', 'itab153_planar', 'yokogawa64_planar', 'yokogawa160_planar'}
    % create a list with planar channel names
    chan = {};
    for i=1:length(sens.label)
      if ~isempty(findstr(sens.label{i}, '_dH')) || ~isempty(findstr(sens.label{i}, '_dV'))
        chan{i} = sens.label{i}(1:(end-3));
      end
    end
    chan = unique(chan);
    % find the matching channel-duplets
    ind = [];
    lab = {};
    for i=1:length(chan)
      ch1 =  [chan{i} '_dH'];
      ch2 =  [chan{i} '_dV'];
      sel = match_str(sens.label, {ch1, ch2});
      if length(sel)==2
        ind = [ind; i];
        lab(i,:) = {ch1, ch2};
        meanpnt1 = mean(sens.coilpos(abs(sens.tra(sel(1),:))>0.5, :), 1);
        meanpnt2 = mean(sens.coilpos(abs(sens.tra(sel(2),:))>0.5, :), 1);
        pnt(i,:) = mean([meanpnt1; meanpnt2], 1);
        meanori1 = mean(sens.coilori(abs(sens.tra(sel(1),:))>0.5, :), 1);
        meanori2 = mean(sens.coilori(abs(sens.tra(sel(2),:))>0.5, :), 1);
        ori(i,:) = mean([meanori1; meanori2], 1);
      end
    end
    lab = lab(ind,:);
    pnt = pnt(ind,:);
    ori = ori(ind,:);
    
  case 'neuromag122'
    % find the matching channel-duplets
    ind = [];
    lab = {};
    for i=1:2:140
      % first try MEG channel labels with a space
      ch1 = sprintf('MEG %03d', i);
      ch2 = sprintf('MEG %03d', i+1);
      sel = match_str(sens.label, {ch1, ch2});
      % then try MEG channel labels without a space
      if (length(sel)~=2)
        ch1 = sprintf('MEG%03d', i);
        ch2 = sprintf('MEG%03d', i+1);
        sel = match_str(sens.label, {ch1, ch2});
      end
      % then try to determine the channel locations
      if (length(sel)==2)
        ind = [ind; i];
        lab(i,:) = {ch1, ch2};
        meanpnt1 = mean(sens.coilpos(abs(sens.tra(sel(1),:))>0.5,:), 1);
        meanpnt2 = mean(sens.coilpos(abs(sens.tra(sel(2),:))>0.5,:), 1);
        pnt(i,:) = mean([meanpnt1; meanpnt2], 1);
        meanori1 = mean(sens.coilori(abs(sens.tra(sel(1),:))>0.5,:), 1);
        meanori2 = mean(sens.coilori(abs(sens.tra(sel(2),:))>0.5,:), 1);
        ori(i,:) = mean([meanori1; meanori2], 1);
      end
    end
    lab = lab(ind,:);
    pnt = pnt(ind,:);
    ori = ori(ind,:);
    
  case 'neuromag306'
    % find the matching channel-triplets
    ind = [];
    lab = {};
    for i=1:300
      % first try MEG channel labels with a space
      ch1 = sprintf('MEG %03d1', i);
      ch2 = sprintf('MEG %03d2', i);
      ch3 = sprintf('MEG %03d3', i);
      [sel1, sel2] = match_str(sens.label, {ch1, ch2, ch3});
      % the try MEG channels without a space
      if isempty(sel1)
        ch1 = sprintf('MEG%03d1', i);
        ch2 = sprintf('MEG%03d2', i);
        ch3 = sprintf('MEG%03d3', i);
        [sel1, sel2] = match_str(sens.label, {ch1, ch2, ch3});
      end
      % then try to determine the channel locations
      if (~isempty(sel1) && length(sel1)<=3)
        ind = [ind; i];
        lab(i,sel2) = sens.label(sel1)';
        meanpnt  = [];
        meanori  = [];
        for j = 1:length(sel1)
          meanpnt  = [meanpnt; mean(sens.coilpos(abs(sens.tra(sel1(j),:))>0.5,:), 1)];
          meanori  = [meanori; mean(sens.coilori(abs(sens.tra(sel1(j),:))>0.5,:), 1)];
        end
        pnt(i,:) = mean(meanpnt, 1);
        ori(i,:) = mean(meanori, 1);
      end
    end
    lab = lab(ind,:);
    pnt = pnt(ind,:);
    ori = ori(ind,:);
    
  otherwise
    % compute the position for each gradiometer or electrode
    nchan = length(sens.label);
    if isfield(sens, 'elecpos')
      nelec = size(sens.elecpos,1); % these are the electrodes
    elseif isfield(sens, 'coilpos')
      ncoil = size(sens.coilpos,1); % these are the coils
    end
    
    if ~isfield(sens, 'tra') && isfield(sens, 'elecpos') && nchan==nelec
      % there is one electrode per channel, which means that the channel position is identical to the electrode position
      pnt = sens.elecpos;
      ori = nan(size(pnt));
      lab = sens.label;
      
    elseif isfield(sens, 'tra') && isfield(sens, 'elecpos') && isequal(sens.tra, eye(nelec))
      % there is one electrode per channel, which means that the channel position is identical to the electrode position
      pnt = sens.elecpos;
      ori = nan(size(pnt));
      lab = sens.label;
      
    elseif isfield(sens, 'tra') && isfield(sens, 'elecpos') && isequal(sens.tra, eye(nelec)-1/nelec)
      % there is one electrode per channel, channels are average referenced
      pnt = sens.elecpos;
      ori = nan(size(pnt));
      lab = sens.label;
      
    elseif ~isfield(sens, 'tra') && isfield(sens, 'coilpos') && nchan==ncoil
      % there is one coil per channel, which means that the channel position is identical to the coil position
      pnt = sens.coilpos;
      ori = sens.coilori;
      lab = sens.label;
      
    elseif isfield(sens, 'tra')
      % each channel depends on multiple sensors (electrodes or coils), compute a weighted position for the channel
      % for MEG gradiometer channels this means that the position is in between the two coils
      % for bipolar EEG channels this means that the position is in between the two electrodes
      pnt = nan(nchan,3);
      ori = nan(nchan,3);
      if isfield(sens, 'coilpos')
        for i=1:nchan
          weight = abs(sens.tra(i,:));
          weight = weight ./ sum(weight);
          pnt(i,:) = weight * sens.coilpos;
          ori(i,:) = weight * sens.coilori;
        end
      elseif isfield(sens, 'elecpos')
        for i=1:nchan
          weight = abs(sens.tra(i,:));
          weight = weight ./ sum(weight);
          pnt(i,:) = weight * sens.elecpos;
        end
      end
      lab = sens.label;
      
    end
    
end % switch senstype

n   = size(lab,2);
% this is to fix the planar layouts, which cannot be plotted anyway
if n>1 && size(lab, 1)>1 % this is to prevent confusion when lab happens to be a row array
  pnt = repmat(pnt, n, 1);
  ori = repmat(ori, n, 1);
end

% ensure that the channel order is the same as in sens
[sel1, sel2] = match_str(sens.label, lab);
lab = lab(sel2);
pnt = pnt(sel2, :);
ori = ori(sel2, :);

% ensure that it is a row vector
lab = lab(:);

% do a sanity check on the number of positions
nchan = numel(sens.label);
if length(lab)~=nchan || size(pnt,1)~=nchan || size(ori,1)~=nchan
  warning('the positions were not determined for all channels');
end
